Struct PieceOffset

#[repr(C)]
pub struct PieceOffset(/* private fields */);

Piece offset in sector

Implementations

impl PieceOffset

pub const ZERO: PieceOffset

Piece index 0.

pub const ONE: PieceOffset

Piece index 1.

pub const fn to_bytes(self) -> [u8; 2]

Convert piece offset to bytes.

Trait Implementations

impl Add for PieceOffset

type Output = PieceOffset

The resulting type after applying the + operator.

fn add(self, rhs: PieceOffset) -> PieceOffset

Performs the + operation.

impl AddAssign for PieceOffset

fn add_assign(&mut self, rhs: PieceOffset)

Performs the += operation.

impl Clone for PieceOffset

fn clone(&self) -> PieceOffset

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for PieceOffset

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Decode for PieceOffset

fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy, ) -> Result<Self, Error>

Attempt to deserialise the value from input.

fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self>, ) -> Result<DecodeFinished, Error>

where I: Input,

Attempt to deserialize the value from input into a pre-allocated piece of memory.

fn skip<I>(input: &mut I) -> Result<(), Error>

where I: Input,

Attempt to skip the encoded value from input.

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type.

impl Default for PieceOffset

fn default() -> PieceOffset

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for PieceOffset

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for PieceOffset

fn fmt(&self, __derive_more_f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<__RhsT> Div<__RhsT> for PieceOffset

where u16: Div<__RhsT, Output = u16>,

type Output = PieceOffset

The resulting type after applying the / operator.

fn div(self, rhs: __RhsT) -> PieceOffset

Performs the / operation.

impl<__RhsT> DivAssign<__RhsT> for PieceOffset

where u16: DivAssign<__RhsT>,

fn div_assign(&mut self, rhs: __RhsT)

Performs the /= operation.

impl Encode for PieceOffset

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding.

fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy, )

Convert self to a slice and append it to the destination.

fn encode(&self) -> Vec<u8>

Convert self to an owned vector.

fn using_encoded<__CodecOutputReturn, __CodecUsingEncodedCallback: FnOnce(&[u8]) -> __CodecOutputReturn>( &self, f: __CodecUsingEncodedCallback, ) -> __CodecOutputReturn

Convert self to a slice and then invoke the given closure with it.

fn encoded_size(&self) -> usize

Calculates the encoded size.

impl From<PieceOffset> for u16

fn from(value: PieceOffset) -> Self

Converts to this type from the input type.

impl From<PieceOffset> for u32

fn from(original: PieceOffset) -> Self

Converts to this type from the input type.

impl From<PieceOffset> for u64

fn from(original: PieceOffset) -> Self

Converts to this type from the input type.

impl From<PieceOffset> for usize

fn from(original: PieceOffset) -> Self

Converts to this type from the input type.

impl From<u16> for PieceOffset

fn from(value: u16) -> Self

Converts to this type from the input type.

impl Hash for PieceOffset

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl MaxEncodedLen for PieceOffset

fn max_encoded_len() -> usize

Upper bound, in bytes, of the maximum encoded size of this item.

impl<__RhsT> Mul<__RhsT> for PieceOffset

where u16: Mul<__RhsT, Output = u16>,

type Output = PieceOffset

The resulting type after applying the * operator.

fn mul(self, rhs: __RhsT) -> PieceOffset

Performs the * operation.

impl<__RhsT> MulAssign<__RhsT> for PieceOffset

where u16: MulAssign<__RhsT>,

fn mul_assign(&mut self, rhs: __RhsT)

Performs the *= operation.

impl Ord for PieceOffset

fn cmp(&self, other: &PieceOffset) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for PieceOffset

fn eq(&self, other: &PieceOffset) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for PieceOffset

fn partial_cmp(&self, other: &PieceOffset) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for PieceOffset

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Step for PieceOffset

fn steps_between(start: &Self, end: &Self) -> (usize, Option<usize>)

🔬This is a nightly-only experimental API. (step_trait)

Returns the bounds on the number of successor steps required to get from start to end like Iterator::size_hint().

fn forward_checked(start: Self, count: usize) -> Option<Self>

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the successor of self count times.

fn backward_checked(start: Self, count: usize) -> Option<Self>

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the predecessor of self count times.

fn forward(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the successor of self count times.

unsafe fn forward_unchecked(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the successor of self count times.

fn backward(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the predecessor of self count times.

unsafe fn backward_unchecked(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the predecessor of self count times.

impl Sub for PieceOffset

type Output = PieceOffset

The resulting type after applying the - operator.

fn sub(self, rhs: PieceOffset) -> PieceOffset

Performs the - operation.

impl SubAssign for PieceOffset

fn sub_assign(&mut self, rhs: PieceOffset)

Performs the -= operation.

impl TrivialType for PieceOffset

where u16: TrivialType,

const METADATA: &[u8]

Data structure metadata in binary form, describing shape and types of the contents, see [IoTypeMetadataKind] for encoding details.

const SIZE: u32 = _

unsafe fn from_bytes(bytes: &[u8]) -> Option<&Self>

Create a reference to a type, which is represented by provided memory.

unsafe fn from_bytes_mut(bytes: &mut [u8]) -> Option<&mut Self>

Create a mutable reference to a type, which is represented by provided memory.

fn as_bytes(&self) -> &[u8]

Access the underlying byte representation of a data structure

unsafe fn as_bytes_mut(&mut self) -> &mut [u8]

Access the underlying mutable byte representation of a data structure.

impl TypeInfo for PieceOffset

type Identity = PieceOffset

The type identifying for which type info is provided.

fn type_info() -> Type

Returns the static type identifier for Self.

impl Copy for PieceOffset

impl EncodeLike for PieceOffset

impl Eq for PieceOffset

impl StructuralPartialEq for PieceOffset